Q-Logic 59042-07 A Manual do Utilizador Página 146
- Página / 206
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
B – Command Line Interface
Set Setup Command
B-56 59042-07 A
0
Examples The following is an example of the Set Setup SNMP command:
SANbox2 #> admin start
SANbox2 (admin) #> set setup snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
SNMPEnabled (True / False) [True ]
Contact (string, max=64 chars) [<sysContact undefined]
Location (string, max=64 chars) [sysLocation undefined]
Trap1Address (dot-notated IP Address) [10.20.71.15 ]
Trap1Port (decimal value) [162 ]
Trap1Severity (see allowed options above) [warning ]
Trap1Version (1 / 2) [2 ]
Trap1Enabled (True / False) [False ]
Trap2Address (dot-notated IP Address) [0.0.0.0 ]
Trap2Port (decimal value) [162 ]
Trap2Severity (see allowed options above) [warning ]
Trap2Version (1 / 2) [2 ]
Trap2Enabled (True / False) [False ]
Trap3Address (dot-notated IP Address) [0.0.0.0 ]
Trap3Port (decimal value) [162 ]
Trap3Severity (see allowed options above) [warning ]
Trap3Version (1 / 2) [2 ]
Trap3Enabled (True / False) [False ]
Trap4Address (dot-notated IP Address) [0.0.0.0 ]
Trap4Port (decimal value) [162 ]
Trap4Severity (see allowed options above) [warning ]
Trap4Version (1 / 2) [2 ]
Trap4Enabled (True / False) [False ]
Trap5Address (dot-notated IP Address) [0.0.0.0 ]
Trap5Port (decimal value) [162 ]
Trap5Severity (see allowed options above) [warning ]
Trap5Version (1 / 2) [2 ]
Trap5Enabled (True / False) [False ]
ReadCommunity (string, max=32 chars) [public ]
WriteCommunity (string, max=32 chars) [private ]
- Installation Guide 1
- Document Revision History 2
- Table of Contents 3
- Section 3 Planning 4
- Section 4 Installation 5
- Appendix A Specifications 6
- Page viii 59042-07 A 8
- Introduction 9
- Related Materials 10
- New in this Release 10
- Safety Notices 11
- Sicherheitshinweise 11
- Communications Statements 12
- Statement 12
- CE Statement 13
- VCCI Class A Statement 14
- BSMI Class A Statement 14
- Laser Safety Information 15
- Accessible Parts 15
- Pièces Accessibles 15
- Zugängliche Teile 15
- General Public License 16
- Preamble 16
- 1 – Introduction 17
- 59042-07 A 1-9 17
- 1-10 59042-07 A 18
- 59042-07 A 1-11 19
- 1-12 59042-07 A 20
- 59042-07 A 1-13 21
- 1-14 59042-07 A 22
- Technical Support 23
- Availability 23
- Training 23
- Contact Information 23
- 1-16 59042-07 A 24
- General Description 25
- Chassis Controls and LEDs 26
- Maintenance Button 27
- Resetting a Switch 27
- Chassis LEDs 28
- Over Temperature LED (Amber) 28
- Fan Fail LED (Amber) 28
- Heartbeat LED (Amber) 28
- Input Power LED (Green) 29
- Fibre Channel Ports 29
- Port LEDs 30
- Port Logged-In LED 30
- Port Activity LED 30
- Port Types 31
- Ethernet Port 32
- Serial Port 33
- Power Supply and Fan 34
- Switch Management 34
- SANsurfer Switch Manager 34
- Command Line Interface 35
- File Transfer Protocol 36
- Planning 37
- Device Access 38
- Soft Zones 39
- Performance 40
- Distance 40
- Bandwidth 41
- Multiple Chassis Fabrics 42
- Optimizing Device Performance 42
- 3 – Planning 43
- 59042-07 A 3-7 43
- Common Topologies 44
- Cascade Topology 44
- Mesh Topology 45
- Multistage Topology 46
- Fabric Security 47
- User Account Security 47
- Fabric Services 47
- Fabric Management 48
- Installation 49
- Environmental Conditions 50
- Installing a Switch 50
- Mount the Switch 51
- Install SFP Transceivers 52
- Configure the Workstation 54
- SANsurfer Management Suite 58
- SMS Installation for Windows 58
- 4 – Installation 59
- 59042-07 A 4-11 59
- SMS Installation for Linux 60
- SMS Installation for Solaris 62
- 59042-07 A 4-17 65
- 4-18 59042-07 A 66
- Configure the Switch 67
- Cable Devices to the Switch 69
- Install Firmware 69
- Powering Down a Switch 71
- 4-24 59042-07 A 72
- Diagnostics/Troubleshooting 73
- Heartbeat LED Blink Patterns 74
- System Error Blink Pattern 74
- Logged-In LED Indications 77
- E_Port Isolation 78
- Excessive Port Errors 79
- POST Diagnostics 80
- 5-8 59042-07 A 80
- Chassis Diagnostics 81
- Fan Fail LED is Illuminated 82
- Recovering a Switch 83
- Maintenance – Exit 84
- Maintenance – Image Unpack 84
- Maintenance – Copy Log Files 85
- Maintenance – Reset Switch 86
- Specifications 87
- Maintainability 88
- Dimensions 89
- Electrical 89
- Environmental 90
- Regulatory Certifications 90
- Modifying a Configuration 92
- Commands 96
- Admin Command 98
- B – Command Line Interface 100
- Alias Command 100
- B-10 59042-07 A 100
- Config Command 101
- B-12 59042-07 A 102
- 59042-07 A B-13 103
- Create Support Command 104
- 59042-07 A B-15 105
- Date Command 106
- Firmware Install Command 107
- Hardreset Command 108
- Help Command 109
- History Command 110
- Hotreset Command 111
- Image Command 112
- B-24 59042-07 A 114
- SANbox2 (admin) $>hotreset 114
- Lip Command 115
- Passwd Command 116
- Ping Command 117
- Ps Command 118
- Quit Command 119
- Reset Command 120
- Set Command 125
- B-36 59042-07 A 126
- Set Config Command 127
- 59042-07 A B-45 135
- B-46 59042-07 A 136
- 59042-07 A B-47 137
- Set Log Command 138
- 59042-07 A B-49 139
- B-50 59042-07 A 140
- Set Port Command 141
- B-52 59042-07 A 142
- Set Setup Command 143
- B-56 59042-07 A 146
- 59042-07 A B-57 147
- Show Command 148
- 59042-07 A B-59 149
- 59042-07 A B-65 155
- B-66 59042-07 A 156
- 59042-07 A B-67 157
- B-68 59042-07 A 158
- 59042-07 A B-69 159
- B-70 59042-07 A 160
- 59042-07 A B-71 161
- B-72 59042-07 A 162
- Show Config Command 163
- B-74 59042-07 A 164
- 59042-07 A B-75 165
- Show Log Command 166
- 59042-07 A B-77 167
- B-78 59042-07 A 168
- Show Perf Command 169
- B-80 59042-07 A 170
- Show Setup Command 171
- B-82 59042-07 A 172
- 59042-07 A B-83 173
- Shutdown Command 174
- Test Command 175
- Uptime Command 178
- User Command 179
- B-90 59042-07 A 180
- 59042-07 A B-91 181
- Whoami Command 182
- Zone Command 183
- B-94 59042-07 A 184
- 59042-07 A B-95 185
- B-96 59042-07 A 186
- Zoneset Command 187
- B-98 59042-07 A 188
- Zoning Command 189
- 59042-07 A B-101 191
- B-102 59042-07 A 192
- 59042-07 A B-103 193
- B-104 59042-07 A 194
- Glossary 195
- Glossary-2 59042-07 A 196
- 59042-07 A Glossary-3 197
- Glossary-4 59042-07 A 198
- 59042-07 A Glossary-5 199
- Glossary-6 59042-07 A 200
- Numerics 201
- Index-2 59042-07 A 202
- 59042-07 A Index-3 203
- Index-4 59042-07 A 204
- 59042-07 A Index-5 205
- Index-6 59042-07 A 206
Manuais e produtos relacionados com Comutadores de rede Q-Logic 59042-07 A
Comutadores de rede Q-Logic 5800V Manual do Utilizador
(134 páginas)
(134 páginas)
Comutadores de rede Q-Logic QLA2342 Manual do Utilizador
(214 páginas)
(214 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.118 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais