Q-Logic FIRMWARE VERSION 7.4 Manual do Utilizador descarregar pdf (Página 36)

3 – Event Messages

Alarm Events

3-22 59060-05 A

(A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended

credit not granted for port: port_number)

Meaning: Loop ports cannot borrow credits from the credit pool.

Action: Change the port type to G_Port or F_Port.

(A1005.0013) (Hotswap procedure failed - must hardreset switch)

Meaning: The blade hot-swap procedure failed or the procedure was not

followed correctly.

Action: Perform a hard reset.

(A1005.0020) (Warning - development logging is enabled)

Meaning: Development logging is enabled.

Action: Contact your authorized maintenance provider.

3(A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State)

Meaning: After changing the switch administrative state from Diagnostics to

any other state, the switch must be reset to complete the state

change.

Action: Reset the switch.

(A1005.0034) (System resource error - contact technical support)

Meaning: There is a system resources problem on the switch.

Action: Contact technical support.

(A1005.0035) (System resource error - contact technical support)

Meaning: There is an internal problem on the switch.

Action: Contact technical support.

(A1005.0036) (Hotswap procedure failed before last reset - must hardreset switch)

Meaning: The blade hotswap procedure failed and the switch was reset

without a power-on self test.

Meaning: Reset the switch with a hard reset.

(A1005.0037) (Hotswap procedure never completed - the blade will not be functional until

the switch is hardreset)

Meaning: The blade hot-swap procedure was not completed.

Action: Reset the switch with a hard reset.

(A1005.0038) (Switch incompatibility error - contact technical support)

Meaning: Switch incompatibility error.

Action: Contact technical support.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Sem comentários

Q-Logic FIRMWARE VERSION 7.4 Manual do Utilizador Página 36