Q-Logic iSR6142 Manual do Utilizador

SN0054659-00 AiSR6142Command Line Interface (CLI)User’s Guide

1 – IntroductionTechnical Support1-4 SN0054659-00 ASPhone Numbers by Language +63-2-885-6712 - English+63-2-885-6713 - (Mandarin)+63-2-885-6714 - (Jap

4 – Command ReferenceCommand Syntax4-80 SN0054659-00 ASTargetRemoves targets from the router’s database. Typically, you can use this command to remove

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-81ATraceroutePrints the route a network packet takes to the reach the destination specified by the

4 – Command ReferenceCommand Syntax4-82 SN0054659-00 ASNotes

SN0054659-00 A A-1A Log MessagesThis appendix provides reference material on messages logged to a file. (For details, see “Show Logs” on page 4-60.)Lo

A – Log MessagesInformational Log MessagesA-2 SN0054659-00 ASApplication ModulesThe application modules generate the informational log messages listed

A – Log MessagesInformational Log MessagesSN0054659-00 A A-3A54963 QLIS_SetDdbEntryContinue:[%d:%d] Remote system connectionestablished171554986 QLIS_

A – Log MessagesInformational Log MessagesA-4 SN0054659-00 ASiSCSI DriverThe following informational log messages are common to both iSCSI ports: 1 (G

A – Log MessagesInformational Log MessagesSN0054659-00 A A-5AFibre Channel DriverThe following informational log messages are common to both Fibre Cha

A – Log MessagesInformational Log MessagesA-6 SN0054659-00 ASUser ModulesThe user modules generate the log messages listed in Table A-4 and described

A – Log MessagesInformational Log MessagesSN0054659-00 A A-7A151903 qapimaptargettoinitiator_1_svc: Localmap added to target device %.2x:%.2x:%.2x:%.2

SN0054659-00 A 2-12 Command UsageThe command line interface (CLI) enables you to perform a variety of router management tasks through an Ethernet or s

A – Log MessagesInformational Log MessagesA-8 SN0054659-00 ASFCIPThe FCIP module generates the informational log messages listed in Table A-5 and desc

A – Log MessagesInformational Log MessagesSN0054659-00 A A-9ATOE DriverThe TOE driver generates the informational log messages listed in Table A-6 and

A – Log MessagesError Log MessagesA-10 SN0054659-00 ASError Log MessagesThe following sections list and describe the error log messages by reporting m

A – Log MessagesError Log MessagesSN0054659-00 A A-11A41257 QLIS_LoginPduContinue: Invalid initiator name. Initiator: 29741265 QLIS_LoginPduContinue:

A – Log MessagesError Log MessagesA-12 SN0054659-00 AS41771 QLBI_GetLunList: Lun allocation failed for LunId %d 81141994 QLFC_Login: VpIndex (%d) out

A – Log MessagesError Log MessagesSN0054659-00 A A-13A43271 QLFCIP_IncomingFrame: Got Status aborted pTrb->pBufDescList[0]:%p Trb Direction:0x%x23

A – Log MessagesError Log MessagesA-14 SN0054659-00 AS7 NULL doorbell routine for unloaded drivers. When a driver is unloaded, the doorbell routine is

A – Log MessagesError Log MessagesSN0054659-00 A A-15A323 iSCSI Login PDU was received with a TSIH out of range. This would occur if the iSCSI initiat

A – Log MessagesError Log MessagesA-16 SN0054659-00 AS1034 Login attempted using Fibre Channel virtual port (VP) index that is out-of-range (range = 0

A – Log MessagesError Log MessagesSN0054659-00 A A-17A2311 FCIP incoming frame: Got Status aborted pTrb->pBufDescList[0]:%p Trb Direction:0x%x.231

2 – Command UsageGuest Account2-2 SN0054659-00 ASGuest AccountRouters come from the factory with the following account already defined:This guest acco

A – Log MessagesError Log MessagesA-18 SN0054659-00 ASiSCSI DriverThe following error log messages are common to both iSCSI ports, 1 (GE1) and 2 (GE2)

A – Log MessagesError Log MessagesSN0054659-00 A A-19A329 The iSCSI processor failed the external loopback test.337 The iSCSI processor command to dis

A – Log MessagesError Log MessagesA-20 SN0054659-00 ASFibre Channel DriverThe following error log messages are common to both Fibre Channel ports, 1 (

A – Log MessagesError Log MessagesSN0054659-00 A A-21A107254 #%d: QLUpdateSinglePortCont 0x%x: out of slots in host database758107267 #%d: QLFcipIsrEv

A – Log MessagesError Log MessagesA-22 SN0054659-00 ASUser ModulesThe user modules generate the error log messages listed in Table A-11 and described

A – Log MessagesError Log MessagesSN0054659-00 A A-23A139297 QBRPC_Initialize:BridgeStatus Mem Allocation error 33139298 QBRPC_Initialize:Diag Mem All

A – Log MessagesError Log MessagesA-24 SN0054659-00 AS21 Failed memory allocation for Get LUN List API.22 Failed memory allocation for Get Presented

A – Log MessagesFatal Log MessagesSN0054659-00 A A-25ASystemThe system modules generate the error log messages listed in Table A-12 and described foll

A – Log MessagesFatal Log MessagesA-26 SN0054659-00 AS69941 #%d: QLUtmProcessResponseQueue: Invalid handle %x EntryType %x30969951 #%d: QLSetNvram: QL

A – Log MessagesFatal Log MessagesSN0054659-00 A A-27A70836 #%d: QLStartFw: Invalid Fw loader state 0x%x 120470837 #%d: QLStartFw: Load Fw loader time

2 – Command UsageWorking with SAN Router ConfigurationsSN0054659-00 A 2-3ASave Router Configuration and PersistencePerform the following steps to save

A – Log MessagesFatal Log MessagesA-28 SN0054659-00 ASFC DriverThe following fatal log messages are common to both Fibre Channel ports, 1 (FC1) and 2

A – Log MessagesFatal Log MessagesSN0054659-00 A A-29A10692 #%d: QLFcipInterruptServiceRoutine: Invalid interrupt status: %x 292102716 #%d: QLIsrEvent

A – Log MessagesFatal Log MessagesA-30 SN0054659-00 ASTOE DriverThe TOE driver generates the fatal log messages listed in Tab le A -1 5 and described

A – Log MessagesFatal Log MessagesSN0054659-00 A A-31ASystemThe system modules generate the fatal log messages listed in Table A-16 and described foll

A – Log MessagesFatal Log MessagesA-32 SN0054659-00 ASNotes

SN0054659-00 A B-1B Simple Network Management Protocol (SNMP)IntroductionSimple network management protocol (SNMP) provides monitoring and trap functi

B – Simple Network Management Protocol (SNMP)IntroductionB-2 SN0054659-00 ASSNMP Trap ConfigurationSNMP trap configuration supports setting up to eigh

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)SN0054659-00 A B-3AManagement Information Base (MIB)The following sectio

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)B-4 SN0054659-00 ASqsrNoOfGbEPortsqsrAgentVersionNetwork Port TableThe n

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)SN0054659-00 A B-5AqsrNwPortRoleqsrNwPortIndexqsrNwPortAddressModeqsrIPA

2 – Command UsageWorking with SAN Router Configurations2-4 SN0054659-00 ASRestore Router Configuration and PersistenceTo restore the router’s configur

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)B-6 SN0054659-00 ASqsrNetMaskqsrGatewayqsrMacAddressqstNwLinkStatusqsrNw

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)SN0054659-00 A B-7AqsrFcPortEntryQsrFcPortEntryA Fibre Channel port entr

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)B-8 SN0054659-00 ASqsrFcPortWwnqsrFcPortIdqsrFcPortTypeqsrFcLinkStatusqs

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)SN0054659-00 A B-9AqsrSensorEntryQsrSensorEntryA sensor entry consists o

B – Simple Network Management Protocol (SNMP)Management Information Base (MIB)B-10 SN0054659-00 ASqsrSensorValueqsrUpperThresholdqsrLowerThresholdqsrS

B – Simple Network Management Protocol (SNMP)NotificationsSN0054659-00 A B-11ANotificationsThe router provides the following notification types: Noti

B – Simple Network Management Protocol (SNMP)NotificationsB-12 SN0054659-00 ASAgent Start Up NotificationThe agent startup notification indicates that

B – Simple Network Management Protocol (SNMP)NotificationsSN0054659-00 A B-13ASensor NotificationThe sensor notification indicates that the state for

B – Simple Network Management Protocol (SNMP)NotificationsB-14 SN0054659-00 ASNotes

SN0054659-00 A Index-1iSR6142 Command Line Interface (CLI)User’s GuideAIndexAAdmin command 4-3Applicationerror log A-10log messages A-2BBeacon comman

SN0054659-00 A 3-13 Configuring CHAPThis chapter describes CHAP and provides the procedures for configuring CHAP from the command line interface (CLI)

iSR6142 Command Line Interface (CLI)User’s GuideIndex-2 SN0054659-00 ASCommunityread B-1trap B-1Configurationsmodifying 2-2SAN router 2-2saving and r

SN0054659-00 A Index-3iSR6142 Command Line Interface (CLI)User’s GuideAMessages (continued)16-20 A-231690-2051 A-317-21 A-30184524-184525 A-81-9 A-23

iSR6142 Command Line Interface (CLI)User’s GuideIndex-4 SN0054659-00 ASPPassword command 4-21Ping command 4-22Properties, SNMP B-1QQuit command 4-23R

SN0054659-00 A Index-5iSR6142 Command Line Interface (CLI)User’s GuideAUUni-directional CHAP configuration 3-3, 3-5User moduleserror log messages A-2

iSR6142 Command Line Interface (CLI)User’s GuideIndex-6 SN0054659-00 ASNotes

3 – Configuring CHAPDiscovery Session—Bi-directional CHAP3-2 SN0054659-00 ASDiscovery Session—Bi-directional CHAPTo configure a bi-directional CHAP us

3 – Configuring CHAPDiscovery Session—Uni-directional CHAPSN0054659-00 A 3-3ADiscovery Session—Uni-directional CHAPTo configure a single-direction CHA

3 – Configuring CHAPNormal Session—Bi-directional CHAP3-4 SN0054659-00 ASNormal Session—Bi-directional CHAPTo configure a bi-directional CHAP used dur

3 – Configuring CHAPNormal Session—Uni-directional CHAPSN0054659-00 A 3-5ANormal Session—Uni-directional CHAPTo configure single-direction CHAP to be

Page ii SN0054659-00 ASiSR6142 Command Line Interface (CLI)User’s Guide© 2008 QLogic Corporation. All Rights Reserved Worldwide.Published: September 2

3 – Configuring CHAPNormal Session—Uni-directional CHAP3-6 SN0054659-00 ASNotes

SN0054659-00 A 4-14 Command ReferenceThis chapter lists and describes the CLI commands in alphabetical order. Each command description includes its sy

4 – Command ReferenceCommand Syntax4-2 SN0054659-00 ASCommand SyntaxThe CLI commands use the following syntax:commandkeywordkeyword [value]keyword [va

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-3AAdminOpens and closes an administrator session. You can run any command that changes the router

4 – Command ReferenceCommand Syntax4-4 SN0054659-00 ASBeaconEnables or disables the Heartbeat and System Fault LEDs flashing. The heartbeat and system

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-5AClearProvides two operations: it removes all entries from the router’s log file, or it resets th

4 – Command ReferenceCommand Syntax4-6 SN0054659-00 ASDateDisplays or sets the date and time. To set the date and time, the information string must be

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-7AFcipRouteConfigures a new FCIP route and lets you modify or delete an existing FCIP route. Each

4 – Command ReferenceCommand Syntax4-8 SN0054659-00 ASRemote IPv6 Address [:: ] fe80::21b:21ff:fe06:d517MTU Siz

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-9A TCP Window Size (0=8KB, 1=16KB, 2=32KB) [32768 ] Window Scaling (0=Enable, 1=

SN0054659-00 A Page iiiiSR6142 Command Line Interface (CLI)User’s GuideATable of Contents1 IntroductionIntended Audience . . . . . . . . . . . . . .

4 – Command ReferenceCommand Syntax4-10 SN0054659-00 ASFRUSaves and restores the router’s configuration.Authority Admin session to restore.Syntax frur

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-11AHelpDisplays a list of the commands and their syntax.Authority NoneSyntax helpExamples Help com

4 – Command ReferenceCommand Syntax4-12 SN0054659-00 ASmemory | mgmt | ntpperf | presented_initiators | presented_targetsproperties | remotemaps | rem

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-13AHistoryDisplays a numbered list of the previously entered commands.Authority NoneSyntax History

4 – Command ReferenceCommand Syntax4-14 SN0054659-00 ASImageUpdates the router’s firmware image and cleans up (removes) the image files in the router’

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-15AInitiatorAdds, modifies, and removes an initiator in the router’s database.Authority Admin sess

4 – Command ReferenceCommand Syntax4-16 SN0054659-00 ASInitiator remove command example:QRouter (admin) #> initiator rmIndex (WWNN/iSCSI Name)-----

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-17ALocalmapMaps a locally-connected initiator device to a locally-connected target device. The ini

4 – Command ReferenceCommand Syntax4-18 SN0054659-00 ASFC presented initiator WWPN [21:01:00:c0:dd:0c:8b:e2 ] :The selected target has not been presen

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-19AThe selected target has not been presented on the port that was selected to be accessed the ini

Page iv SN0054659-00 AiSR6142 Command Line Interface (CLI)User’s GuideSImage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 – Command ReferenceCommand Syntax4-20 SN0054659-00 ASLogoutExits the command line interface and returns you to the login prompt.Authority NoneKeywor

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-21APasswordChanges the guest and administrator passwords.Authority Admin sessionSyntax passwordExa

4 – Command ReferenceCommand Syntax4-22 SN0054659-00 ASPingVerifies the connectivity of each Ethernet port, management, GE1 (iSCSI 1), and GE2 (iSCSI

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-23AQuitExits the command line interface and returns you to the login prompt.Authority NoneSyntax q

4 – Command ReferenceCommand Syntax4-24 SN0054659-00 ASRebootRestarts the router firmware.Authority Admin sessionSyntax rebootExamples Reboot command

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-25ARemote MapMaps an initiator and target, one of which is located on a remote system (router). Af

4 – Command ReferenceCommand Syntax4-26 SN0054659-00 AS----- ----------------------0 20:00:00:e0:8b:08:5f:3d,21:00:00:e0:8b:08:5f:3d (Initiator)1 20:0

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-27ASmart-Write (0=Enable, 1=Disable) [Enabled ]Smart-Write Compression (0=Enable, 1=Disable) [Disa

4 – Command ReferenceCommand Syntax4-28 SN0054659-00 ASPlease select a remote mapping from the list above ('q' to quit): 0Smart-Write Compre

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-29ARemote PeerLets you assign a router peer to a local router, which can have up to four peers.Aut

SN0054659-00 A Page viSR6142 Command Line Interface (CLI)User’s GuideAShow Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 – Command ReferenceCommand Syntax4-30 SN0054659-00 ASRemotepeer remove command example:QRouter (admin) #> remotepeer rmIndex (System Info, Mgmt I

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-31AReset FactoryRestores the router configuration parameters to the factory default values. It del

4 – Command ReferenceCommand Syntax4-32 SN0054659-00 ASSaveSaves logs and traces.Authority Admin sessionSyntax savecapturelogstracesKeywords captureCr

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-33ASave traces command examples:QRouter (admin) #> save tracesSave ASIC Traces completed. Packa

4 – Command ReferenceCommand Syntax4-34 SN0054659-00 ASSetConfigures general router parameters as well as parameters that are specific to the Fibre Ch

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-35AsystemSets system parameters such as symbolic name and log level.

4 – Command ReferenceCommand Syntax4-36 SN0054659-00 ASSet CHAPConfigures general router parameters.Authority Admin sessionSyntax set chapExamples Set

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-37ASet FCConfigures a Fibre Channel port.Authority Admin sessionSyntax set fc [port_num]Keywords [

4 – Command ReferenceCommand Syntax4-38 SN0054659-00 ASSet FeaturesLets you enter licensed router features such as SmartWrite or additional host ports

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-39ASet iSCSIConfigures an iSCSI port.Authority Admin sessionSyntax set iscsi [port_num]Keywords [p

Page vi SN0054659-00 AiSR6142 Command Line Interface (CLI)User’s GuideSNetwork Port Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 – Command ReferenceCommand Syntax4-40 SN0054659-00 AS IPv6 Tgt TCP Port No. (Min=1024, Max=65535) [3260 ] IPv6 Window Scaling (0=Enable

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-41ASet iSNSConfigures iSNS parameters for an iSCSI port.Authority Admin sessionSyntax set isns [po

4 – Command ReferenceCommand Syntax4-42 SN0054659-00 ASSet MgmtConfigures the router’s management port (10/100).Authority Admin sessionSyntax set mgmt

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-43ASet NTPConfigures the network time protocol parameters. NTP sets the date and time on the route

4 – Command ReferenceCommand Syntax4-44 SN0054659-00 ASSet PropertiesConfigures the CLI (command line interface) properties.Authority Admin sessionSyn

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-45ASet SNMPConfigures the general simple network management protocol (SNMP) properties, as well as

4 – Command ReferenceCommand Syntax4-46 SN0054659-00 AS-------------------------------------Destination enabled (0=Enable, 1=Disable) [Disabled ]Confi

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-47ASet SystemConfigures the general router parameters.Authority Admin sessionSyntax set systemExam

4 – Command ReferenceCommand Syntax4-48 SN0054659-00 ASShowDisplays router operational information.Authority NoneSyntax showchapfc [port_num]fciproute

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-49ADisplays SCSI initiator information: iSCSI or FC.iscsi [port_num]Displays iSCSI port informatio

SN0054659-00 A 1-11 IntroductionThis manual describes how to use the command line interface (CLI) to configure and manage the iSR6142 Intelligent Stor

4 – Command ReferenceCommand Syntax4-50 SN0054659-00 ASDisplays the router statistics, both FC and iSCSI.systemDisplays router product information inc

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-51AShow CHAPDisplays CHAP configuration.Authority NoneSyntax show chapExamples Show CHAP command e

4 – Command ReferenceCommand Syntax4-52 SN0054659-00 ASShow FCDisplays Fibre Channel port information for the specified port. If you do not specify th

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-53AShow FcipRoutesDisplays FCIP route(s) configuration parameters.Authority NoneSyntax show fcipro

4 – Command ReferenceCommand Syntax4-54 SN0054659-00 ASShow FeaturesDisplays the licensed features that have been enabled on the router.Authority None

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-55AShow InitiatorsDisplays SCSI initiator information for iSCSI, FC, or both.Authority NoneSyntax

4 – Command ReferenceCommand Syntax4-56 SN0054659-00 ASShow iSCSIDisplays iSCSI information for the specified port. If you do not specify the port, th

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-57A IPv6 Link Local fe80::2c0:ddff:fe0c:8be2 IPv6 Default Router :: IPv6 Targ

4 – Command ReferenceCommand Syntax4-58 SN0054659-00 ASShow iSNSDisplays iSNS configuration information for the specified iSCSI port. If you do not sp

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-59AShow LocalmapsDisplays all local mappings on the router. Local mappings are mappings between in

1 – IntroductionTechnical Support1-2 SN0054659-00 AS ANSI SCSI – SCSI-3 Architecture Model (SAM), X3T10/994D/Rev 18, SCSI-3 Controller Command Set, X

4 – Command ReferenceCommand Syntax4-60 SN0054659-00 ASShow LogsDisplays the router event log.Authority NoneSyntax show logsExamples Show Logs command

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-61AShow MemoryDisplays the router’s memory usage. If there are no configured FCIP routes, it shows

4 – Command ReferenceCommand Syntax4-62 SN0054659-00 ASShow MgmtDisplays the router’s management port (10/100) configuration.Authority NoneSyntax show

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-63AShow NTPDisplays the router’s network time protocol (NTP) configuration.Authority NoneSyntax sh

4 – Command ReferenceCommand Syntax4-64 SN0054659-00 ASShow PerformanceDisplays router performance data.Authority NoneSyntax show perfbyteinit_rbytein

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-65AShow Performance byte command example:QRouter #> show perf byteDisplaying bytes/sec (total).

4 – Command ReferenceCommand Syntax4-66 SN0054659-00 ASShow Presented InitiatorsDisplays initiators presented by the router: FC.Authority NoneSyntax s

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-67AShow Presented TargetsDisplays targets presented by the router: FC, iSCSI, or both.Authority No

4 – Command ReferenceCommand Syntax4-68 SN0054659-00 ASShow Presented iSCSI Targets command example:QRouter #> show presented_targets iscsiPresente

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-69AShow PropertiesDisplays the router’s CLI (command line interface) properties.Authority NoneSynt

1 – IntroductionTechnical SupportSN0054659-00 A 1-3ATrainingQLogic offers certification training for the technical professional for QLogic HBAs, CNAs,

4 – Command ReferenceCommand Syntax4-70 SN0054659-00 ASShow RemotemapsDisplays all remote maps that have been configured.Authority NoneSyntax show rem

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-71AShow RemotepeersDisplays all remote peers.Authority NoneSyntax show remotepeersExamples Show Re

4 – Command ReferenceCommand Syntax4-72 SN0054659-00 ASShow SNMPDisplays the router’s simple network management protocol (SNMP) and any configured tra

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-73AShow StatsDisplays the router statistics: FC and iSCSI.Authority NoneSyntax show statsExamples

4 – Command ReferenceCommand Syntax4-74 SN0054659-00 ASMAC Rcvd Carrier Sense Errors 0MAC Rcvd Dropped Frames 0MAC Rcvd CRC Errors 0MAC Rcvd Encoding

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-75AUnexpected I/O Rcvd 0iSCSI Format Errors 0Header Digest Errors 0Data Digest Errors 0Sequence Er

4 – Command ReferenceCommand Syntax4-76 SN0054659-00 ASShow SystemDisplays router product information including the serial number, software version, h

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-77AShow TargetsDisplays targets the router discovered: FC, iSCSI, or both.Authority NoneSyntax sho

4 – Command ReferenceCommand Syntax4-78 SN0054659-00 ASShow VLANDisplays the router’s VLAN configuration.Authority NoneSyntax show vlan [port_num]Keyw

4 – Command ReferenceCommand SyntaxSN0054659-00 A 4-79AShutdownPerforms an orderly shutdown of the router firmware. It does not power down the router.